P310 VAR 00 VAR 10 Clutch
The Warner P310 VAR 00/VAR 10 is pneumatically operated, toothed clutch, and functioning under pressure.
Features
- Utilisation
- Coupling of a pulley or a hub
- Engagement has to be made at standstill or at very low speed, in case of doubt consult the factory
- Positive coupling for drive without slipping
- Standard available for random or synchronized operation (one or more position(s)/rev) Multi-position/rev as option (VAR n0, “n” indicates number of positions)
- Option : detection disc allows the coupling position to be validated
- Stationary compressed air distribution included
- Sealed bearings
- Verify position of tooth prior to installation
- no wear adjustment required
- The ball bearing life is a function of the speed and pressure, refer to curve shown (see diagram)
- The anti-rotation device of the cylinder shall be inserted in anti rotation slot, with a side play of 0,5 mm and a 1 mm play to the bottom. This avoids a normal stress on the ball-bearings.
- It is forbidden to use in case of vibrations
- The customers mounting method must take into account the axial thrust
- Device intended for horizontal use, for vertical use please consult the factory
- Oiled compressed air. For dry air please consult factory
- Can be operated with hydraulic oil. In that case, please consult the factory